Real Gutter Projects Across New Hampshire
Every roof drains water a little differently. Here's an inside look at how we inspect, size, and install gutter systems for homes and businesses across the state, starting with the projects we've completed and building this library as we go.
Learn From Real Gutter Projects
A gutter system has to earn its keep on every house it's on. Roof pitch, valleys, how many trees are dropping needles or leaves on it, snow loads, the age of the fascia — all of it changes what actually needs to happen. We've walked enough New Hampshire roofs to know that two homes on the same street can need two very different gutter systems.
That's what this page is for. Instead of just showing finished photos, we're documenting real jobs from start to finish: what we found, what we recommended, and why. Each project we add will walk through:
- The problem that got us called out in the first place
- What we found once we actually got up on the roof
- The solution we recommended, and what else we considered
- The materials and sizing we used, and why
- How the finished system looks and performs
Below is our first full project breakdown. We're adding more as we finish documenting each job, so check back over the next few weeks.
Featured Project
A closer look at a recent job, the problem we found, and how we solved it.
Monadnock Indoor Tennis Club Commercial Gutter Replacement
The Foote Method™: Every Project Starts With an Inspection
Our recommendations come from how a roof actually collects and moves water, not from trying to sell the largest gutter system available. Before we quote a job, we check:
Frequently Asked Questions
We look at the roof's total drainage area, pitch, and valley locations, then size the gutters and downspouts to handle that volume of water. On larger or commercial roofs, that often means moving up to 6-inch gutters and larger 3x4 downspouts rather than defaulting to a standard residential setup.
Sometimes, yes. If the rest of the system is sized correctly and in good shape, a section repair can be the more practical, lower-cost option. We'll tell you honestly when a full replacement isn't necessary.
Yes, we install year-round in New Hampshire as long as conditions on the roof edge and fascia allow safe, proper installation. Winter jobs sometimes take a bit more planning around snow and ice.
Most residential jobs are completed in a single day. Larger commercial projects, like buildings with long gutter runs or multiple downspout upgrades, can take longer depending on scope and any fascia repair needed.
Properly installed .032 aluminum gutters hold up well for decades in New Hampshire's climate. Copper lasts even longer and develops a natural patina over time, but comes at a higher upfront cost. We'll walk you through the tradeoffs based on your home and budget.
The core process is the same: inspect, size correctly, and install for the long term. Commercial buildings often need larger gutter profiles, more downspouts, closer hanger spacing, and additional planning around flat roofs and snow loads.
Planning Your Own Project?
Whether it's a full gutter replacement, a repair, or a commercial drainage upgrade, we're happy to take a look and give you a straight answer.